How to Install and Care for Your Chomps License Plate Frame

Quick Answer

Installing your Chomps License Plate Frame takes just a few minutes with basic tools, and regular cleaning keeps it looking sharp on your vehicle.

Step-by-Step Installation and Care Guide

1. Gather Tools and Prepare the Frame: You'll need a screwdriver (usually Phillips head) and the existing screws from your vehicle's license plate. Remove any old frame or cover. Hold the Chomps License Plate Frame up to your plate to check alignment. Check that the screw holes on the frame match your plate's holes before tightening.
2. Attach the Frame to the License Plate: Place the license plate inside the frame, then position both against your vehicle's plate mount. Insert the screws through the frame, plate, and mount, and tighten them evenly by hand. Avoid overtightening to prevent cracking the frame or stripping the screws. Tighten screws just until snug—overtightening can damage the frame's finish.
3. Clean the Frame Regularly: Wipe the frame with a soft, damp cloth and mild soap to remove dirt and salt. Rinse with clean water and dry with a microfiber towel. Avoid abrasive cleaners or scrub brushes that could scratch the surface. Clean the frame every few weeks, especially after driving in snow or rain.

Product Details

• License Plate Frame: Durable construction built to withstand outdoor elements This frame handles sun, rain, and road debris, so you don't need to worry about frequent replacements.